跳到主要内容

Getting Started with 5 Way Switch

This repo demonstrates how to use the 5 way Switch in Wio Terminal.

Example Code

Note: WIO_5S_UP, WIO_5S_DOWN, WIO_5S_LEFT, WIO_5S_RIGHT and WIO_5S_PRESS are defined for the Wio Terminal 5 Way Switch.

void setup() {
Serial.begin(115200);
pinMode(WIO_5S_UP, INPUT_PULLUP);
pinMode(WIO_5S_DOWN, INPUT_PULLUP);
pinMode(WIO_5S_LEFT, INPUT_PULLUP);
pinMode(WIO_5S_RIGHT, INPUT_PULLUP);
pinMode(WIO_5S_PRESS, INPUT_PULLUP);
}

void loop() {
// put your main code here, to run repeatedly:
if (digitalRead(WIO_5S_UP) == LOW) {
Serial.println("5 Way Up");
}
else if (digitalRead(WIO_5S_DOWN) == LOW) {
Serial.println("5 Way Down");
}
else if (digitalRead(WIO_5S_LEFT) == LOW) {
Serial.println("5 Way Left");
}
else if (digitalRead(WIO_5S_RIGHT) == LOW) {
Serial.println("5 Way Right");
}
else if (digitalRead(WIO_5S_PRESS) == LOW) {
Serial.println("5 Way Press");
}
delay(200);
}
Loading Comments...