Skip to main content

Grove - GSR Sensor

GSR stands for galvanic skin response, is a method of measuring the electrical conductance of the skin. Strong emotion can cause stimulus to your sympathetic nervous system, resulting more sweat being secreted by the sweat glands. Grove - GSR allows you to spot such strong emotions by simple attaching two electrodes to two fingers on one hand. It is an interesting to create emotion related projects like sleep quality monitor.

caution

Grove-GSR Sensor measures the resistance of the people, NOT Conductivity!

Version

Product VersionChangesReleased Date
Grove - GSR_Sensor V1.0InitialJune 19, 2013
Grove - GSR_Sensor V1.2Add C3 100nf between M324PW-TSSOP14 and GNDJuly 31, 2014

Specification

ParameterValue/Range
Operating voltage3.3V/5V
SensitivityAdjustable via a potentiometer
Input SignalResistance, NOT Conductivity
Output SignalVoltage, analog reading
Finger contact materialNickel
tip

More details about Grove modules please refer to Grove System

Platforms Supported

ArduinoRaspberry Pi
caution

The platforms mentioned above as supported is/are an indication of the module's software or theoritical compatibility. We only provide software library or code examples for Arduino platform in most cases. It is not possible to provide software library / demo code for all possible MCU platforms. Hence, users have to write their own software library.

Getting Started

Play With Arduino

Hardware

  • Step 1. We need to prepare the below stuffs:
Seeeduino V4.2Base ShieldGrove - GSR
Get ONE NowGet ONE NowGet ONE Now
  • Step 2. Connect the Grove-GSR to A0 on Base Shield.
  • Step 3. Plug the base Shield into Seeeduino-V4.2.
  • Step 4. Connect Seeeduino-V4.2 to PC by using a USB cable.
note

If we don't have a Base Shield, don't worry, the sensor can be connected to your Arduino directly. Please follow below tables to connect with Arduino.

SeeeduinoGrove-GSR Sensor
GNDBlack
5VRed
NCWhite
A0Yellow

Software

  • Step 1. Copy the code into Arduino IDE and upload.
const int GSR=A0;
int sensorValue=0;
int gsr_average=0;

void setup(){
Serial.begin(9600);
}

void loop(){
long sum=0;
for(int i=0;i<10;i++) //Average the 10 measurements to remove the glitch
{
sensorValue=analogRead(GSR);
sum += sensorValue;
delay(5);
}
gsr_average = sum/10;
Serial.println(gsr_average);
}

  • Step 2. Do not Wear the GSR sensor.
  • Step 3. Click the Tools-> Serial Plotter from Arduino IDE
  • Step 4. Use the screw driver to adjust resistor until the serial output as 512.
  • Step 5. Wear the GSR sensor.
  • Step 6. We will see the below graph. Please deep breath and see the trends.

Human Resistance = ((1024+2Serial_Port_Reading)10000)/(512-Serial_Port_Reading), unit is ohm, Serial_Port_Reading is the value display on Serial Port(between 0~1023)

Play With Raspberry Pi (With Grove Base Hat for Raspberry Pi)

Hardware

  • Step 1. Things used in this project:
Raspberry piGrove Base Hat for RasPiGrove - GSR Sensor
Get ONE NowGet ONE NowGet ONE Now
  • Step 2. Plug the Grove Base Hat into Raspberry Pi.
  • Step 3. Connect the Grove - GSR Sensor to to the A0 port of the Base Hat.
  • Step 4. Connect the Raspberry Pi to PC through USB cable.
note

For step 3 you are able to connect the Grove - GSR sensor to any Analog Port but make sure you change the command with the corresponding port number.

Software

  • Step 1. Follow Setting Software to configure the development environment.
  • Step 2. Download the source file by cloning the grove.py library.
cd ~
git clone https://github.com/Seeed-Studio/grove.py

  • Step 3. Excute below commands to run the code.
cd grove.py/grove
nano grove_gsr_sensor.py

Then you should copy following code in this file and hit ++ctrl+x++ to quit and save.


import math
import sys
import time
from grove.adc import ADC


class GroveGSRSensor:

def __init__(self, channel):
self.channel = channel
self.adc = ADC()

@property
def GSR(self):
value = self.adc.read(self.channel)
return value

Grove = GroveGSRSensor


def main():
if len(sys.argv) < 2:
print('Usage: {} adc_channel'.format(sys.argv[0]))
sys.exit(1)

sensor = GroveGSRSensor(int(sys.argv[1]))

print('Detecting...')
while True:
print('GSR value: {0}'.format(sensor.GSR))
time.sleep(.3)

if __name__ == '__main__':
main()


  • Step 4. Excute below command to run the code

python grove_gsr_sensor.py 0

success

If everything goes well, you will be able to see the following result


pi@raspberrypi:~/grove.py/grove $ python grove_gsr_sensor.py 0
Detecting...
GSR value: 503
GSR value: 503
GSR value: 503
GSR value: 503
GSR value: 503
GSR value: 383
GSR value: 256
GSR value: 314
GSR value: 348
GSR value: 361
GSR value: 368
GSR value: 371
^CTraceback (most recent call last):
File "grove_gsr_sensor.py", line 69, in <module>
main()
File "grove_gsr_sensor.py", line 66, in main
time.sleep(.3)
KeyboardInterrupt

You can quit this program by simply press ctrl+c.

note

You may have noticed that for the analog port, the silkscreen pin number is something like A1, A0, however in the command we use parameter 0 and 1, just the same as digital port. So please make sure you plug the module into the correct port, otherwise there may be pin conflicts.

FAQ

Q1: What is the unit of output?

A1: We measure the signal by voltage and print to COM port as (0~1023).

Grove - GSR v1.0

Grove - GSR v1.2

Resources

Projects

eMotion - Towards a Better Future: We believe we can use biometric sensors, the security of the Helium platform and strength of Google Cloud to surface possible anxiety states.

Tech Support

Please submit any technical issue into our forum.


Loading Comments...