DC framework solenoid HCNE1-0630
This 12-Volt DC framework solenoid is great for projects! These types of solenoid are often used for automatic door locks,vending machines,robot etc. However, they work great for almost any project requiring a DC solenoid.
**The solenoid operating temperature should not exceed 80 ℃, or continuous working time less than 1 minute. **Features
- Voltage: 12V DC
- Outline size(mm): 16×19×30
- Movable core: 6(g)
- Loss efficiency: 9.6(W)
- Gravitation: 0mm:1030(g), 2mm:400g, 4mm:220g
- Easily fixed and connected
- Temperature stability, long product life and ensure good performance
- E ring and rubber gasket make the operation of the solenoid valve mute
- Low friction to ensure high efficiency and extend the life of
- Simple and reliable design
Application Ideas
- Vending machines, ticket vending machines,money exchange machine
- Office equipment: fax machines, punch card machines, copiers, typewriters, cash registers, plotters
- Transport equipment: automatic door locks, safety belt lock, automotive solenoid valve, parking facilities
- Appliances: tape recorder, video recorder, keyboard, automatic knitting machine, karaoke machine
- Other: packaging machine, robot, farming equipment, stamping equipment, alarm, water solenoid valve
Specifications
Operating conditions:
Operation temperature: -5 ℃ to 40 ℃, the solenoid valve will not solidification.
Operating humidity: 45% to 85%, the solenoid valve will not solidification.
Storage temperature: -40 ℃ to 75 ℃ in between, the solenoid valve will not solidification.
Storage Humidity: 0% to 95%, the solenoid valve will not solidification.
Performance to show:
Temperature: 65 ℃ or less, can be used for more than a million times.
Maximum working temperature shall not exceed 80 ℃.
No. | Name |
---|---|
1 | Fixed framework |
2 | Cover |
3 | Movable core |
4 | Fixed core |
5 | Solenoid axis |
6 | Solenoid |
7 | Conduit |
Test temperature
Environment temperature23±2
Realative humidity50±10%
Air pressure1013MPa
Insulation resistanceneed 100MΩ insulating resistance when 500VDC insulator testing.
Insulation strengththe strength should be 600VAC/1 min DC standard product table.
Usage
Hardware Installation
Support
<a href="https://www.seeedstudio.com/forum">Ask questions on Seeed forum</a>.
Tech Support
if you have any technical issue. submit the issue into our forum.